PosiLock Pedestal for ConCore & All Steel Access Floor Panels

Pedestal Assembly

Assembly up to 24" FFH shall provide a 6,000 lb. axial load without permanent deformation
Assembly shall provide a 2" total adjustment with a minimum finished floor height of 6"
Standard finished floor heights of 5" to 24" For lower finished floor heights and seismic concerns please contact B&OI.
Overturning moment of 1,000 in./lbs. when Tate recommend pedestal adhesive is utilised on a clean unsealed concrete slab

Die formed hot dipped galvanized steel pedestal head projection welded to a threaded rod with adjustment nut
PosiLock™ fastener shall be self capturing 1/4"- 20 flathead machine screw

Pedestal head shall have tapped holes for engagement of PosiLock™ screws and shall incorporate alignment guides and locating points to laterally contain and positively position the floor panel with or without the use of screws
Solid steel stud shall be 3/4" - 10 UNC
Galvanized nut shall be 3/4" - 10 UNC and shall include an anti-rotation feature when engaged onto the base assembly
Stud shall provide an anti-rotation feature when engaged with the pedestal base assembly (6" FFH or higher